Rod end bearing

Rod end bearing

PHS4 Spherical Plain Bearing with Self-Lubricating Rod End for Hydraulic Cylinders

Eliminate unplanned downtime and costly re-lubrication in hydraulic cylinder pivot points — the PHS4 spherical plain bearing delivers consistent, maintenance-free performance even under oscillating loads and tight space constraints. Self-lubricating PTFE-lined inner race eliminates grease ports and service intervals — critical for sealed hydraulic rod ends where contamination or access is limited M4×0.7 fine-pitch thread ensures precise axial preload control and prevents thread galling during installation — a must for high-cycle automation equipment Radial spherical design with 7mm thickness maintains alignment integrity across ±15° articulation while supporting 4680 N static load Bearing steel construction meets ISO 20015 tolerances for interchangeability with SKF-compatible mounts in wind turbine pitch systems and mobile hydraulics

Inquiry View

Rod end bearing

POS16 Rod End Bearing for Hydraulic Cylinders – Radial Spherical Plain Bearing

Stop hydraulic cylinder failures before they cost you downtime—this POS16 rod end bearing delivers consistent radial load support in high-vibration, high-cycle applications like construction machinery and forging presses. Engineered for reliability where misalignment and shock loads are non-negotiable, it eliminates premature wear seen with standard plain bearings. Non self-lubricating design—grease or oil replenishment is fully controllable, critical for sealed hydraulic systems where contamination must be avoided Whole outer ring + 0° contact angle ensures precise articulation without binding under heavy radial loads Available in P0–P2 precision grades and Z1V1–Z3V3 vibration classes—specify what your OEM assembly line requires 16×85×21 mm specification matches ISO 12240-2 mounting interfaces—no redesign needed

Inquiry View

Rod end bearing

SKF SIKB18F spherical plain bearing for hydraulic cylinders, 18×47×23mm

Stop hydraulic cylinder downtime caused by premature pivot wear — the SKF SIKB18F spherical plain bearing delivers consistent, high-load articulation in demanding cycles, even under misalignment and shock loads common in construction and forging machinery. Engineered for radial load dominance with a 5mm thick outer ring wall — critical for resisting edge loading and brinelling in rod-end applications Grease-lubricated (not self-lubricating), so you retain full control over relubrication intervals and grease selection — no surprises during predictive maintenance windows Fits standard 18mm shafts and mounts directly into existing SIKB18F replacement bearing housings — zero redesign needed Backed by ISO 9001/TS 16949-certified quality and shipped from Shanghai with 100% on-time delivery guarantee

Inquiry View

Rod end bearing

SKF PHSB6–PHSB12 Rod End Bearings for Hydraulic Cylinders & Construction Machinery

Stop downtime from premature rod end failure in high-cycle hydraulic cylinders and heavy-duty construction machinery — these SKF PHSB6–PHSB12 rod end bearings deliver consistent angular articulation under shock loads and misalignment, even where contamination and thermal cycling stress conventional units. SKF rod end bearing series engineered for radial spherical plain operation with zero contact angle — critical for maintaining precise pivot geometry in forging machine linkages and wind power pitch systems Non self-lubricating design allows controlled grease or oil replenishment via the whole outer ring’s relubrication groove — a must for long-life service in sealed hydraulic cylinder rods Available in precision grades up to P2 and vibration classes Z3V3, matching OEM specs for noise-sensitive automation and water conservancy applications Rich stock of all sizes (PHSB6 through PHSB12), backed by 100% on-time global delivery and sub-30-minute technical response from our certified SKF application engineers

Inquiry View

Rod end bearing

POS4 Rod End Plain Bearing for Hydraulic Cylinders – Self-Lubricating

Stop downtime from hydraulic cylinder rod end seizure — the POS4 rod end bearing delivers consistent, maintenance-free articulation even under shock loads and misalignment in construction and forging machinery. Self-lubricating PTFE-lined inner race eliminates greasing intervals and prevents contamination-related failure — critical for sealed hydraulic systems Radial spherical design with 7mm thickness ensures precise angular compliance while maintaining 2480N dynamic load capacity M4×0.7 fine-pitch thread matches OEM mounting specs for direct retrofit into compact shock absorbers and water conservancy actuators Manufactured to ISO 9001/TS 16949 standards with bearing steel rings — compatible with SKF engineering validation protocols

Inquiry View

Rod end bearing

Spherical Plain Rod-End Bearing GEG45XS for High-Precision Wind Turbine Applications

Eliminate unplanned downtime and costly maintenance cycles in offshore wind turbine pitch systems — the GEG45XS bearing delivers consistent, low-noise articulation even under extreme cyclic loads and salt-laden humidity. As an SKF-compatible spherical plain rod end, it’s engineered for direct retrofit into critical blade pitch linkages where steel-on-steel sliding contact must retain dimensional stability after 10,000+ oscillation cycles. High-precision ground raceways and controlled internal clearance ensure ≤0.008 mm radial runout — a non-negotiable spec for avoiding parasitic vibration in multi-MW turbines Neutral packing with anti-corrosion VCI film protects during extended marine logistics — no rework needed before installation OEM/ODM support includes custom housing modifications and torque-angle validation reports for your certification team Backed by our in-house SKF-certified engineers — not just supply, but application assurance for wind power’s toughest environments

Inquiry View

Rod end bearing

Heavy Duty Rod End Bearings for Hydraulic Cylinders – Radial Spherical Plain

Extend service life and eliminate unplanned downtime in high-cycle hydraulic systems — especially where misalignment, shock loads, or extreme ambient temperatures compromise standard rod end bearings. Our Heavy Duty Rod End Bearings for Hydraulic Cylinders – Radial Spherical Plain deliver consistent rotational stability under radial + moment loads, thanks to the precision-ground spherical sliding surface paired with hardened bearing steel inner rings — a critical detail that prevents brinelling in forging and construction machinery applications. Available in SI5T/K through SI12T/K sizes — all with 0° contact angle and whole outer ring design for maximum load distribution Non self-lubricating (grease or oil compatible) — ideal for controlled maintenance regimes in wind turbine hydraulic systems P0–P2 precision grades and Z1V1–Z3V3 vibration classes ensure drop-in reliability for OEM automation and heavy equipment rebuilds Rich stock, 100% on-time delivery, and dedicated engineering support for custom rod end for forging machine configurations

Inquiry View

Rod end bearing

Spherical Plain Bearing PHS22, 22mm Bore, Self-Lubricating for Hydraulic Cylinders

Stop downtime from rod end seizure in hydraulic cylinders operating under heavy, oscillating loads — the spherical plain bearing PHS22 delivers consistent, maintenance-free articulation even where relubrication is impossible. Built for mining equipment and wind turbine actuators that demand reliability across extreme temperature swings and multi-directional stress, it eliminates the guesswork of lubrication scheduling while holding up to 41,700 N static load. Self-lubricating PTFE liner with steel backing — no grease fittings, no maintenance windows, no risk of contamination in sealed hydraulic systems 22 mm bore with M22×1.5 right-hand thread — matches OEM mounting specs for direct replacement in SKF-compatible applications 28 mm radial section height ensures optimal load distribution across the spherical contact surface — critical for avoiding edge loading in misaligned mounts 0.49 kg weight and compact 22×109×28 mm footprint simplify integration into space-constrained actuator housings

Inquiry View

Rod end bearing

SKF SIL6E SILKAC6M SILKB6F water pump spherical plain rod end bearing

Stop bearing failures in high-cycle water pumps and hydraulic systems — this SKF SIL6E SILKAC6M SILKB6F water pump spherical plain bearing delivers consistent angular articulation under radial load, even after thousands of oscillating cycles. Built for OEMs and heavy-industry maintenance teams who can’t afford unplanned downtime, it eliminates premature edge loading thanks to its precisely ground P5-grade raceways and optimized 5mm thickness for torsional stability. Radial spherical plain bearing design with whole outer ring — ideal for misalignment-prone automotive shock absorber and water conservancy machinery mounts Non self-lubricating (requires initial grease fill) — compatible with high-temperature lithium complex greases used in forging machines and construction equipment Specified at 6×21×9 mm with Z2V2 vibration class — a critical fit-and-function match for legacy SKF-certified hydraulic cylinder linkages Backed by 100% on-time delivery and sub-30-minute engineering response — because your plant manager needs certainty, not quotes

Inquiry View

Rod end bearing

Spherical Plain Rod End Bearing SIKAC5M for Hydraulic Cylinders

Extend hydraulic cylinder service life and eliminate premature rod end failure—even under shock loads and misalignment. The spherical plain bearing SIKAC5M delivers precision radial articulation with P5-grade tolerance, a detail critical for maintaining seal integrity and preventing fluid leakage in high-cycle applications. Non-self-lubricating design allows controlled grease replenishment via the outer ring’s relubrication groove—essential for maintaining film strength in forging and water conservancy machinery 5 mm thickness and 5×19×8 mm specification ensure drop-in compatibility with SKF-standard mounting interfaces Whole outer ring construction resists edge loading and brinelling during side-load events common in construction and automation equipment Backed by ISO-certified engineering support and 100% on-time global delivery—from Shanghai to São Paulo, Hamburg to Houston

Inquiry View

Rod end bearing

12mm Stainless Steel Rod End Bearing for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by corrosion or misalignment—this 12mm stainless steel rod end delivers consistent articulation and load-bearing integrity in wet, high-cycle environments where standard carbon steel bearings fail prematurely. Manufactured to SKF PHS12 dimensional and tolerance specs (including the critical 0° contact angle for pure radial load handling) Non-self-lubricating design—enables precise grease selection and scheduled maintenance control, ideal for OEMs managing total cost of ownership Whole outer ring construction with 5mm thickness ensures rigidity under side-load during cylinder extension/retraction In-stock and ready to ship globally—100% on-time delivery backed by ISO 9001/TS 16949 certified quality control

Inquiry View

Rod end bearing

SKF Rod End Bearing SILKB5F SI6C SI6E for Hydraulic Cylinders

Stop hydraulic cylinder downtime before it starts — this SKF rod end bearing delivers consistent angular articulation and radial load stability even under shock loads and misalignment common in forging presses and mobile construction equipment. Pre-greased with high-performance SKF LGHP 2 grease — eliminates premature wear from inadequate relubrication intervals Precision ground raceways with P5 tolerance (≤1.5μm roundness) ensure smooth oscillation without stick-slip at low speeds Whole outer ring design + 5mm wall thickness resists deformation during high-torque pin mounting — critical for OEM cylinder rebuilds In-stock globally and backed by our ISO/TS-certified engineering team for rapid failure analysis or custom modifications

Inquiry View