Rod end bearing

Rod end bearing

Heavy Duty Rod End Spherical Plain Bearing for Hydraulic Cylinders

Stop hydraulic cylinder downtime before it starts — this heavy duty rod end delivers exceptional misalignment compensation and load stability even under shock loads and frequent articulation in construction and mining equipment. Forged bearing steel inner ring with hardened raceway ensures long service life where standard rod ends fatigue prematurely Non self-lubricating design allows precise grease selection (e.g., SKF LGMT 2) for extreme-temperature or high-contamination environments Radial spherical plain bearing geometry supports ±15° angular misalignment without binding — critical for dynamic cylinder mounting points Available in SIQG16ES, SI17C, and SI17ES variants with P0–P2 precision grades to match OEM tolerances

Inquiry View

Rod end bearing

Spherical Plain Rod End Bearing SI-12-E to SI-30-E for Hydraulic Cylinders

Stop hydraulic cylinder downtime before it starts — these SI-12-E rod end bearing units deliver consistent radial load support in high-cycle, misalignment-prone applications like forging presses and water conservancy actuators. Built with through-hardened bearing steel and a precision-ground whole outer ring, they resist edge loading far better than split-ring alternatives — a key reason why our wind power clients report zero premature failures after switching from generic suppliers. Non-self-lubricating design — compatible with your existing centralized grease systems (ISO-L-XBCH 2) Radial spherical plain configuration with 0° contact angle — optimized for pure radial + angular misalignment (≤3°), not axial thrust P0 to P2 precision grades available — critical when pairing with servo-controlled hydraulic rods Rich stock of SI-12-E through SI-30-E — same-day dispatch on orders placed before 15:00 CST

Inquiry View

Rod end bearing

PHS6 Spherical Rod End Bearing 6mm Bore for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by premature rod end wear — the PHS6 spherical rod end bearing delivers consistent, maintenance-free articulation even under shock loads and misalignment in construction and forging equipment. Built with a self-lubricating PTFE liner bonded to hardened bearing steel, it eliminates the need for relubrication intervals that often get missed on site — a critical reliability upgrade for remote or hard-to-access mounting points. 6mm bore with M6×1 thread — fits standard hydraulic piston rods without adapters Radial spherical plain bearing design handles ±15° angular misalignment without binding Dynamic load capacity of 4200 N ensures stability in high-cycle automation and water conservancy applications Compact 6×39×9 mm profile maintains structural integrity where space is constrained

Inquiry View

Rod end bearing

Spherical Plain Rod End Bearing SIKB8F SIL8C SIL8E for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by premature rod end wear — these precision-ground spherical plain bearing assemblies deliver consistent angular articulation under high radial loads and shock conditions, even in dusty, high-vibration environments like construction machinery or forging lines. Features a full outer ring with 5mm thickness and tight 8×25×8mm radial geometry — critical for maintaining alignment when mounting into compact cylinder clevises Non-self-lubricating design lets you specify your preferred grease or oil, giving full control over lubrication intervals and compatibility with existing maintenance protocols Available in P0–P2 precision grades and vibration classes Z1V1–Z3V3 — so you get the exact fit and dynamic behavior your application demands Backed by our in-house SKF-certified engineering team for rapid failure analysis and custom modification if your OEM spec goes beyond standard SIL8C or SIKB8F configurations

Inquiry View

Rod end bearing

PHS14 Rod End Bearing 14mm Bore for Hydraulic Cylinders & Construction Machinery

Extend uptime and reduce maintenance stops on hydraulic cylinders and construction machinery — even under shock loads and misalignment. The PHS14 rod end bearing delivers proven radial spherical plain performance with self-lubricating PTFE-lined inner rings that eliminate grease relubrication cycles in hard-to-access joints. 14mm bore with M14×2 right-hand thread — precision-ground for direct replacement in OEM cylinder rods 19mm thickness and 74mm overall length (14×74×19mm) ensures optimal load distribution across the spherical contact surface Bearing steel construction meets ISO 12212 standards for dynamic load capacity (16,800 N) and static load rating (20,900 N) Supplied in protective box packaging with traceable batch marking — ready for audit-ready inventory in regulated heavy-industry environments

Inquiry View

Rod end bearing

POS16 Rod End Bearing – Self-Lubricating for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by lubrication failure or misalignment—this POS16 rod end delivers consistent, maintenance-free articulation even under shock loads and extreme angular misalignment. Built for engineers who’ve lost production time to seized or prematurely worn rod ends in construction machinery and forging presses, it eliminates the need for relubrication intervals while holding up where standard bearings fatigue. Self-lubricating PTFE-lined bore — no grease fittings, no scheduled maintenance, and zero risk of contamination in sealed hydraulic systems 21 mm thickness with M16×2 right-hand thread — matches OEM mounting specs across major hydraulic actuator platforms 25,400 N static load capacity — engineered for peak loads in mobile equipment where overloading is routine, not exceptional Full outer ring + hardened bearing steel construction — prevents edge loading distortion common in thin-section rod ends under cyclic bending

Inquiry View

Rod end bearing

POS6 Spherical Rod End Bearing for Hydraulic Cylinders – 5mm/6mm/12mm Fisheye Threaded

Stop hydraulic cylinder downtime caused by premature rod end wear — the POS6 spherical rod end bearing delivers consistent angular articulation under high radial loads and shock, even in dusty, high-cycle environments like forging presses and mobile hydraulics. Pre-loaded with precision-ground bearing steel raceways (P0–P2 grade options) for zero play at startup — critical when alignment tolerance is tighter than 0.05° Fisheye-threaded design (5mm/6mm/12mm) ensures full thread engagement without galling — a real-world fix for stripped mounting threads on OEM cylinder rods Non-self-lubricating but accepts standard grease or oil via sealed relubrication ports — gives your maintenance team full control over lubrication intervals In stock now, shipped same-day with ISO-certified traceability and dedicated technical support from our SKF-certified engineering team

Inquiry View

Rod end bearing

Ultra-Low Friction Spherical Rod End Bearing for Hydraulic Cylinders

Extend hydraulic cylinder service life and cut maintenance downtime—especially under high-cycle, high-load conditions where conventional rod ends wear prematurely. Engineered for precision radial articulation with ultra-low friction coefficients, this spherical rod end bearing delivers consistent angular misalignment compensation without stick-slip, even in demanding forging or construction machinery applications. 5mm thickness with full outer ring design ensures optimal load distribution across the spherical contact surface—critical for avoiding edge loading in asymmetric hydraulic actuation P0–P2 precision grades available; vibration classes Z1V1–Z3V3 certified for noise-sensitive automation and shock absorber systems Non-self-lubricating construction allows controlled grease replenishment using high-performance SKF-compatible EP greases—ideal for extended-life maintenance schedules Rich stock + 100% on-time delivery means no project delays waiting for critical bearing replacements

Inquiry View

Rod end bearing

SKF SIL10E Rod End Bearing for Hydraulic Cylinders – Radial Spherical Plain Bearing

Stop hydraulic cylinder downtime before it starts — the SKF SIL10E rod end bearing delivers consistent, high-load articulation in extreme stroke cycles without creep or binding, even under shock loads common in forging and construction machinery. Radial spherical plain bearing design with 5mm thickness ensures precise angular alignment and eliminates edge loading — a critical factor often overlooked until premature wear triggers unscheduled maintenance Compatible with standard grease lubrication (not self-lubricating), so you retain full control over maintenance intervals and compatibility with your existing hydraulic system fluids Supports precision grades up to P2 and vibration classes up to Z3V3 — meaning it’s engineered for applications where positional repeatability and dynamic stability directly impact output quality Backed by ISO 9001/TS 16949-certified production, rich stock availability, and sub-30-minute engineering response — because your uptime depends on more than just the part

Inquiry View

Rod end bearing

POS14 Rod End Bearing – M14×2 Male Thread, Self-Lubricating for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by premature rod end wear — the POS14 rod end delivers consistent, maintenance-free articulation even under shock loads and misalignment in wind turbine pitch systems and heavy-duty forging equipment. Self-lubricating PTFE-lined inner ring eliminates relubrication intervals — critical for inaccessible or sealed hydraulic applications 19mm thickness with full outer ring design ensures axial stability during high-moment cycling — a key differentiator vs. thin-section competitors M14×2 male thread meets ISO 12240-4 standards for direct SKF-compatible integration into existing engineering hydraulic rod end mounts Dynamic load capacity of 16,800 N supports continuous operation in steel mill automation and water conservancy gate actuators

Inquiry View

Rod end bearing

SKF Spherical Plain Joint Bearing SIL20C/SIL20ES for hydraulic cylinders

Stop hydraulic cylinder downtime caused by premature joint wear—this SKF spherical plain bearing delivers unmatched radial load capacity and misalignment tolerance in high-cycle construction and forging applications. Engineered for reliability where vibration, shock loads, and thermal cycling strain standard rod ends, it’s the go-to upgrade for OEMs and maintenance teams who can’t afford field failures. Features precision P5 tolerance on the SIL20TXE-2LS variant—critical for minimizing play in high-dynamic forging machine linkages Grease-lubricated radial spherical plain bearing design with 20×54×16mm dimensions and 5mm raceway thickness for optimal stress distribution Whole outer ring construction resists edge loading and maintains alignment under asymmetric loads common in hydraulic cylinder pivot points Backed by our ISO/TS-certified support: same-day engineering consultation and 100% on-time global delivery via air, sea, or rail

Inquiry View

Rod end bearing

SKF-compatible SILKB14F rod end spherical plain bearing for hydraulic cylinders

Stop hydraulic cylinder downtime before it starts — this SKF-compatible SILKB14F rod end bearing delivers consistent angular articulation under shock loads and misalignment, even in continuous-duty construction and forging applications. Built to match SKF’s dimensional and load specs (15×41×12 mm), it eliminates unexpected failures caused by inadequate radial spherical plain bearing rigidity or grease starvation. Non-self-lubricating design — gives you full control over grease selection and relubrication intervals using high-performance grease technology (Z2V2 vibration-rated) Whole outer ring with 5 mm thickness — critical for resisting edge loading in heavy machinery pivot points where split rings deform under high-load rod end stress P0–P2 precision grades available — choose the exact tolerance class your OEM assembly line requires, not just what’s in stock Ready to ship from Shanghai with 100% on-time delivery — no waiting weeks for custom lead times when your plant schedule demands it

Inquiry View