Ball bearing

Ball bearing

High Precision 6007 2RS Deep Groove Ball Bearing for Wind Turbine Applications

Extend gearbox uptime and reduce unplanned maintenance in demanding wind turbine applications — this 6007 bearing, wind turbine bearing delivers P5 precision and dual-lip 2RS seals engineered for offshore humidity, particulate ingress, and thermal cycling. Rated for continuous radial loads up to 14.3 kN (Cr) with ABEC-5 (P5) tolerance — critical for minimizing cage skew and vibration-induced micro-pitting in high-speed stages Pre-greased with SKF LGEP 2 synthetic grease and sealed to Z3V3 vibration class — no field relubrication needed during first 15,000 operating hours Non-separable, single-row deep groove design ensures axial rigidity under dynamic thrust reversals common in pitch control systems Manufactured to ISO 9001/TS 16949 with full traceability — each batch includes dimensional reports and material certs signed by our in-house SKF-certified engineers

Inquiry View

Ball bearing

High-Speed Thrust Ball Bearing 51100 for Wear-Resistant Reducers

Stop bearing failures in high-speed, high-load reducer applications — especially where misalignment or thermal expansion would normally compromise thrust capacity and service life. Our SKF 51100 thrust bearing for wind turbines delivers P5-grade precision and exceptional wear resistance, engineered specifically for the demanding duty cycles of modern renewable energy gearboxes. Single-row, non-aligning design with zero contact angle — optimized for pure axial load transfer without moment loading Available in P5 precision grade (not just P0), critical for maintaining preload stability at >3,000 rpm In stock and ready to ship globally — backed by our ISO 9001-certified supply chain and dedicated technical support team Grease- or oil-lubricated, with Z2V2 vibration class standard — a key differentiator for noise-sensitive turbine nacelles

Inquiry View

Ball bearing

Thrust Ball Bearings 51205–51405 for Automotive Applications, High-Precision OEM Replacement

Stop transmission noise and premature wear in high-torque automotive applications — our thrust ball bearing delivers OEM-level precision and axial load stability right out of the box. Engineered for car transmission systems where even 0.5 µm runout can trigger vibration complaints, it’s trusted by Tier-1 suppliers across China and Germany for zero-failure field performance. Exact 25×47×15 mm dimensions with P5 precision grade — critical for maintaining gear mesh alignment under dynamic thrust loads Grease- or oil-lubricated, non-aligning, separated design for fast, error-free service replacement Bearing steel construction with Z2V2 low-vibration certification — eliminates the “buzz” that triggers warranty returns In stock and backed by SKF-certified engineering support: we’ll validate fit, preload, and thermal expansion for your specific gearbox housing

Inquiry View

Ball bearing

OEM/ODM Thrust Ball Bearing 51109 for High-Load Industrial Applications

Stop bearing failures under sudden axial loads — this OEM/ODM thrust ball bearing 51109 delivers rock-solid thrust support where standard bearings buckle, especially in wind turbine pitch systems and mining conveyors. Built to SKF 51109 replacement specs but with tighter P5 precision options and Z2V2 low-noise vibration grading, it eliminates unexpected downtime caused by premature raceway deformation. Exact metric dimensions: 45×65×14 mm — critical for drop-in replacement without adapter redesign Separated, non-aligning design allows quick maintenance access while maintaining full load capacity Lubrication-ready for grease or oil — no re-greasing intervals needed in sealed high-speed applications In stock and certified to ISO 9001:2008, with full traceability from our Shanghai hub to your plant floor

Inquiry View

Ball bearing

Stainless Steel Deep Groove Ball Bearing S6014 for High-Precision Automotive Applications

Engineers building high-precision automotive systems finally get consistent rotational accuracy and corrosion resistance—even in humid assembly lines or under aggressive cleaning protocols. This stainless steel bearing, deep groove ball bearing, S6014 bearing delivers zero micro-pitting risk thanks to its AISI 440C raceway finish and optimized internal clearance (C3), a detail that prevents preload shift during thermal cycling. 70×110×20mm dimensions ensure direct drop-in replacement for legacy S6014 designs—no re-engineering needed Unseparated single-row radial construction maintains rigidity under combined axial/radial loads common in e-motor housings Pre-lubricated with SKF LGEP 2 grease—rated for continuous operation up to 120°C without relubrication Backed by our in-house bearing failure analysis team: if vibration spikes occur, we diagnose root cause—not just replace

Inquiry View

Ball bearing

51100 Thrust Ball Bearing 10×24×9 mm for High-Load Axial Applications

Extend bearing life and eliminate unplanned downtime in high-axial-load applications—especially where misalignment or shock loading has previously caused premature failure. This 51100 thrust ball bearing delivers true SKF-grade axial rigidity and precision seating at 10×24×9 mm, with P5 precision rating and Z2V2 low-vibration grading—critical for wind turbine pitch systems and mining conveyor idlers. Single-row, non-aligning design optimized for pure axial loads—no radial load tolerance Grease- or oil-lubricated; compatible with standard SKF-compatible greases like LGEP 2 Separated construction allows easy mounting and inspection of raceways—key for field maintenance In stock and ready to ship globally from Shanghai, backed by our ISO 9001 & TS 16949 certified supply chain

Inquiry View

Ball bearing

6219 Deep Groove Ball Bearing – High-Speed Radial Load Support

Keep critical high-speed machinery running longer with fewer unplanned stops — the 6219 bearing delivers consistent radial load support even under sustained 3000+ rpm operation and thermal cycling common in wind turbine gearboxes and steel mill drives. Available in precision grades up to P5 (ABEC-5), with Z3V3 low-noise vibration class — essential for minimizing resonance in tightly coupled drive systems Non-aligning, single-row deep groove design ensures predictable stiffness and avoids false brinelling in fixed-position applications Grease- or oil-lubricated options, with ZZ/2RS seals tailored for dust-heavy mining environments or clean-room steel finishing lines 95 × 170 × 32 mm dimensions meet ISO 15:2011 standards — drop-in replacement for legacy OEM assemblies without re-engineering shafts or housings

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 2201-2RS for High-Speed Industrial Applications

Extend bearing life and reduce unplanned downtime in high-speed, misalignment-prone applications—especially where thermal growth or shaft deflection challenges standard radial bearings. The self-aligning ball bearing 2201-2RS delivers proven angular compensation up to ±2.5° while maintaining P5 precision and C3 radial clearance for consistent performance under variable load and temperature conditions. 12×32×14 mm compact footprint fits tight OEM spaces without sacrificing load capacity Double-row design with 60° contact angle handles combined radial + moderate axial loads—critical for wind turbine yaw systems and mining conveyor idlers Steel or brass cage options ensure optimal high-speed stability and lubricant retention Sealed 2RS construction eliminates routine relubrication, cutting maintenance labor by up to 40% in remote or hard-to-access installations

Inquiry View

Ball bearing

High-Quality Thrust Ball Bearings 51212–51215 for Heavy-Duty Industrial Use

Stop unplanned downtime in high-load applications — these thrust ball bearing models (51212–51215) deliver consistent axial load capacity even under shock loads and thermal cycling, exactly where wind turbine yaw systems and mining conveyor idlers demand zero compromise. Available in P0–P2 precision grades — choose P4 or P5 if your application requires ≤0.8 μm raceway roughness for extended grease life Separated design means faster installation and no risk of cage distortion during mounting — a critical time-saver on rotating equipment with tight maintenance windows ISO 9001 certified manufacturing, backed by our in-house SKF-certified engineers for application validation and failure root-cause analysis In stock and shipped from Shanghai with full traceability — no waiting for offshore lead times when your production line can’t stop

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 2203 2209K 2203-2RS for High-Load Applications

Extend bearing life and reduce unplanned downtime in demanding high-load applications — especially where misalignment or thermal expansion is a persistent challenge. Our self-aligning ball bearing delivers proven reliability for wind power gearboxes, steel mill conveyors, and mining equipment where precision and resilience matter most. Double-row radial design with 60° contact angle handles combined radial + moderate axial loads while accommodating up to ±2.5° static misalignment Available in P5/P4 precision grades and C3/C4 clearance options — critical for high-speed wind turbine main shafts requiring tight thermal growth control Steel or brass cage options; unseparated construction ensures rigidity under shock loading 10–15 day lead time with ISO 9001/TS 16949 certified quality — backed by SKF-certified application engineers for your site-specific validation

Inquiry View

Ball bearing

Miniature stainless steel ball bearing S695ZZ, 5×13×4mm for precision instruments

Keep your precision instruments running flawlessly in humid, corrosive, or washdown environments — without sacrificing rotational accuracy or service life. The S695ZZ bearing delivers true stainless steel reliability in a 5×13×4mm footprint, engineered for applications where standard chrome steel bearings would pit, seize, or drift out of spec. Full 440C stainless construction — inner/outer rings, balls, and cages — not just “stainless-look” plating Double-shielded (ZZ) for lifelong contamination exclusion and zero maintenance lubrication retention Radial clearance optimized to C3 tolerance — critical for thermal stability in high-cycle lab and medical gear SKF-compatible dimensions and load ratings, backed by our in-house bearing engineers for custom preload or cage modifications

Inquiry View

Ball bearing

Thrust Ball Bearings 51218–51320 for Automotive Transmission Systems

Extend transmission life and eliminate axial play under high-speed gear shifts — our thrust ball bearing 51218–51320 series delivers OEM-grade reliability for automotive powertrains where precision alignment and thermal stability are non-negotiable. Available in P0 to P2 precision grades — critical for maintaining preload integrity across temperature swings in dual-clutch systems Separated, non-aligning design allows rapid service without disturbing adjacent components — saving downtime on assembly lines Grease- or oil-lubricated with Z2V2 vibration rating for smooth engagement at 8,000+ rpm 90×135×35 mm dimensions match SKF 51218 replacement specs exactly — no re-engineering needed

Inquiry View