Ball bearing

Ball bearing

Stainless Steel Deep Groove Ball Bearing S606 for High-Precision Automotive Applications

Extend service life and eliminate unplanned downtime in high-precision automotive assemblies — even under repeated thermal cycling and exposure to road salts or cleaning agents. The stainless steel bearing S606 delivers unmatched corrosion resistance without sacrificing radial load capacity or rotational accuracy. True 6 × 17 × 6 mm metric dimensions — not approximated — ensuring drop-in fit for OEM chassis sensors and EPS motor housings Unseparated single-row deep groove design with optimized raceway curvature for reduced micro-pitting in high-frequency, low-torque applications Manufactured to SKF’s ISO/TS 16949-certified process standards (not generic bearing steel — fully austenitic AISI 440C hardened to 58–62 HRC) Backed by our in-house predictive maintenance team: we analyze your operating data to recommend replacement intervals — not just sell bearings

Inquiry View

Ball bearing

High Precision Stainless Steel S6805ZZ Deep Groove Ball Bearing for Low-Noise Applications

Eliminate unexpected downtime in wind turbines and mining conveyors with the High Precision Stainless Steel S6805ZZ Deep Groove Ball Bearing — engineered for ultra-low noise, zero corrosion creep, and consistent rotational accuracy under sustained radial loads. Stainless steel construction (AISI 440C inner/outer rings + ceramic-grade balls) delivers true corrosion resistance — critical where salt spray, washdowns, or acidic dust compromise standard bearing steel 25×37×7mm dimensions with ZZ double-shielded seals meet SKF-compatible mounting envelopes while maintaining ≤12 dB(A) acoustic emission at 18,000 rpm — verified per ISO 15242-3 Radial play held to C2 tolerance (–8 to –12 μm) ensures preload stability in high-vibration gearboxes without premature micro-pitting Direct drop-in replacement for OEM S6805ZZ applications — no redesign, no recalibration, just extended service life across wind power, steel mill roll stands, and precision food-grade conveyors

Inquiry View

Ball bearing

Stainless Steel Deep Groove Ball Bearing S6003ZZ for High-Precision Automotive Applications

Extend service life and eliminate unplanned downtime in high-speed, corrosion-prone environments — the S6003ZZ bearing delivers unmatched reliability where standard carbon steel bearings fail. Engineered for automotive precision systems and EV motor assemblies, it maintains dimensional stability at 18,000 rpm while resisting salt-spray degradation — critical for wind turbine gearboxes and coastal plant operations. Stainless steel (AISI 440C) inner/outer rings + martensitic hardening — not just surface-treated True deep groove geometry with ±0.005 mm raceway roundness tolerance for low-vibration operation Pre-lubricated with SKF LGMT 2 grease — compatible with IP67-enclosed motor housings 17 × 35 × 11 mm metric dimensions with ZZ double-shielded sealing for zero maintenance in sealed applications

Inquiry View

Ball bearing

High-Performance Thrust Ball Bearings 52213–52216 for Heavy-Duty Mechanical Applications

Stop unplanned downtime in wind turbines and mining conveyors — these thrust ball bearing models deliver consistent axial load capacity under shock loads and thermal cycling, where standard bearings fatigue prematurely. Available in full 52213–52216 range with P5 precision and Z2V2 vibration rating — critical for minimizing cage slip in high-thrust, low-RPM applications Separated, non-aligning design allows rapid field replacement without disassembling adjacent components — saving hours during maintenance windows Pre-lubricated with high-drop-point grease compatible with oil mist systems, eliminating relubrication guesswork in remote or hazardous locations Made from vacuum-melted bearing steel (not standard SAE 52100) for extended fatigue life in continuous heavy-duty cycles

Inquiry View

Ball bearing

High-Speed Deep Groove Ball Bearings 16008–16011 for Wind Turbine Generators

Extend generator uptime and reduce unplanned maintenance in wind turbine applications with the SKF 16011 bearing — engineered for sustained high-speed operation where thermal stability and cage integrity are non-negotiable. Single-row deep groove design with 0° contact angle ensures optimal radial load distribution at 3,000+ rpm — critical for gearbox-generator coupling alignment Precision-ground bearing steel rings and optimized internal clearance (C3) deliver consistent performance under rapid thermal cycling Compact 55×90×11 mm footprint fits OEM mounting constraints without compromising dynamic load rating (18.2 kN Cr) Pre-lubricated and sealed — eliminates field relubrication errors that cause 68% of premature wind turbine bearing failures

Inquiry View

Ball bearing

High-Load Thrust Ball Bearings 51108/51109/51110 for Wind Turbines

Keep wind turbine main shafts running reliably under extreme axial loads — even during gust-driven torque spikes and seasonal thermal cycling. These thrust ball bearing models (51108/51109/51110) are engineered specifically for pitch and yaw systems where misalignment isn’t an option — and that’s why they’re non-aligning, separated, and built to P5 precision as standard. Single-row design with 40×60×13 mm dimensions — a critical fit for OEM-integrated hub assemblies requiring exact axial stiffness Lubrication-ready for either grease or oil, supporting extended maintenance intervals in remote or offshore installations Z2V2 vibration grade and ISO 9001:2008 certified — backed by our in-house SKF-certified engineers for failure root-cause analysis In stock now and shipped from Shanghai with dedicated account support for enterprise-scale deployments

Inquiry View

Ball bearing

High Precision Stainless Steel Deep Groove Ball Bearing S6205ZZ for Low Noise Automotive Applications

Eliminate high-frequency noise and premature failure in EV motor assemblies—without sacrificing corrosion resistance or precision timing. The S6205ZZ bearing delivers true low-noise performance thanks to its ABEC-7 ground stainless steel raceways and optimized internal clearance, a detail most suppliers overlook when quoting generic “stainless” bearings. Stainless steel construction (AISI 440C inner/outer rings + martensitic hardening) ensures long service life in humid, salt-laden, or washdown environments—critical for automotive Tier 1s with zero tolerance for field recalls Exact metric dimensions: 25 × 52 × 15 mm, fully interchangeable with OEM motor housings requiring S6205ZZ stainless steel 25x52x15mm fit Double-shielded (ZZ) design retains high-viscosity synthetic grease under 18,000 rpm continuous operation—no re-lubrication needed over full motor lifecycle Backed by SKF-certified engineering support: free shaft fit analysis, thermal expansion modeling, and failure root-cause review if vibration thresholds exceed 2.1 mm/s RMS

Inquiry View

Ball bearing

Thrust Ball Bearings 51122–51324 for High-Load Automotive Applications

Stop bearing failures under extreme axial loads in automotive driveline and transmission systems — these precision thrust ball bearings deliver unmatched load capacity and rotational stability where standard units fatigue prematurely. Engineered for OEM-tier reliability, they’re trusted by Tier-1 suppliers building next-gen EV gearboxes and heavy-duty differentials. Dimensionally exact 110×145×25 mm (51122) with P5 precision grade — critical for maintaining preload integrity in high-speed thrust stacks Non-aligning, separated design enables quick mounting and precise axial positioning without runout risk Grease- or oil-lubricated, with Z2V2 low-noise vibration rating for NVH-sensitive applications In stock and backed by our ISO 9001-certified technical support — including custom preload verification and application-specific life calculation

Inquiry View

Ball bearing

High-Performance Thrust Ball Bearings 51210–51410 for Heavy-Duty Industrial Use

Stop bearing failures in high-load thrust applications—especially where misalignment or sudden axial shocks cause premature wear. Our thrust ball bearing 51210–51410 series delivers unmatched axial rigidity and thermal stability under continuous heavy-duty cycles, exactly what wind turbine pitch systems and steel mill roll stands demand. Available in precision grades up to P2 and vibration classes Z3V3—critical for minimizing run-in noise and extending service life in high-speed gearboxes Separated design allows for easier mounting and precise preload adjustment—no need to disassemble adjacent components Grease- or oil-lubricated options with sealed or open configurations, backed by ISO 9001:2008 certified manufacturing In stock now with same-day dispatch from Shanghai—and supported by SKF-certified engineers for application review

Inquiry View

Ball bearing

Thrust Ball Bearing 51104 (20×35×10 mm) for High-Load Industrial Applications

Stop unplanned downtime in high-load applications—this thrust ball bearing 51104 (20×35×10 mm) delivers consistent axial load capacity where precision and reliability are non-negotiable. Engineered for industrial environments where misalignment isn’t an option, it eliminates the risk of premature failure caused by subtle mounting errors—no need to over-specify or over-engineer your assembly. Single-row, non-aligning design with separated washers—critical for accurate preload control in wind turbine pitch systems Available in P0–P2 precision grades and Z1V1–Z3V3 vibration classes to match your OEM or retrofit performance tier In stock and ready to ship globally from Shanghai, backed by SKF-certified engineering support—not just bearings, but application assurance Lubricated for life with grease or oil options; bearing steel rings meet ISO 9001:2008 and TS 16949-compliant production

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 2310-2RS for High-Speed Industrial Applications

Stop bearing failures caused by shaft misalignment or thermal expansion — this self-aligning ball bearing 2310-2RS maintains smooth, low-friction rotation even under dynamic load shifts and up to 2.5° of static misalignment. Double-row design with 60° contact angle delivers superior radial load capacity while preserving high-speed stability — ideal for gearmotor and wind turbine yaw systems Available in P5 precision grade and C3 clearance (standard for industrial thermal growth), so it performs reliably where OEM specs demand tighter tolerances Steel or brass cage options let you match lubrication regime and speed requirements — no guesswork on compatibility Ships in 10–15 days from Shanghai with full OEM/ODM support, including custom grease fill and sealing variants

Inquiry View

Ball bearing

Thrust Ball Bearings 51308–51110 for High-Load Industrial Applications

Stop bearing failures in high-load thrust applications—especially where misalignment or sudden axial shocks compromise uptime in wind turbines and heavy machinery. Our thrust ball bearing series (51308–51110) delivers P5 precision and true separated design for fast, error-free maintenance—no more guessing during field replacement. Engineered for pure axial loads only—zero contact angle (0°) ensures no radial load distortion or premature cage wear In stock and ready to ship globally from Shanghai, with ISO 9001-certified traceability and OEM/ODM support Grease- or oil-lubricated options—critical for wind power gearboxes where thermal cycling demands consistent film strength Bearing steel construction with Z2V2 vibration rating: meets the quiet, stable operation required by precision steel mill drives

Inquiry View