Rod end bearing

Rod end bearing

PHS6 Spherical Plain Bearing – Self-Lubricating Rod End for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by lubrication failure or misalignment—this PHS6 spherical plain bearing delivers consistent, maintenance-free articulation even under shock loads and tight installation spaces. Built for construction machinery and automation equipment where reliability trumps replacement speed, it eliminates the need for relubrication ports or scheduled grease intervals. Radial spherical plain bearing geometry with 9mm thickness ensures precise angular misalignment compensation (±12°) without binding—critical for long-cycle hydraulic actuators M6×1 thread and 6mm inner diameter match OEM rod end mounting specs across major European and Chinese cylinder brands Self-lubricating PTFE-lined bearing steel raceway maintains low friction after 500,000+ oscillation cycles—even in dust-heavy, water-splashed environments Box-packed with traceable batch labeling; shipped from Shanghai with dedicated technical support for application validation

Inquiry View

Rod end bearing

PHS18 Spherical Plain Bearing – 18mm Bore, Self-Lubricating Rod End for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by premature rod end wear — the PHS18 spherical plain bearing delivers consistent, maintenance-free articulation even under shock loads and misalignment in construction and forging machinery. Self-lubricating PTFE-lined inner ring eliminates relubrication cycles and avoids grease washout in wet or dusty environments Precisely ground M18×1.5 thread with 23mm radial thickness ensures secure mounting and optimal load distribution across the spherical contact surface Rated for 30,200 N static load — engineered to outperform standard rod ends in high-cycle hydraulic applications Fully compatible with SKF mounting dimensions and torque specs, so you get genuine performance without redesigning your existing assemblies

Inquiry View

Rod end bearing

Self-Lubricating Spherical Plain Bearings for Wind Turbines & Mining Equipment

Stop scheduling unplanned maintenance shutdowns for wind turbine pitch systems or mining articulation joints — these self-lubricating spherical plain bearings deliver 3× longer service life in high-load, oscillating applications where relubrication is inaccessible or hazardous. Engineered with a PTFE-impregnated bronze liner bonded to hardened steel inner rings — no external grease ports, no risk of lubricant washout in offshore salt spray or dusty mine sites Rated for combined radial and thrust loads up to 120 kN (SI30ES), with angular misalignment tolerance of ±4.5° — critical for dynamic blade pitch linkages Neutral packaging + ISO-compliant carton pallets ensure traceable, damage-free delivery to your site — backed by SKF-certified engineering support for mounting torque specs and housing fit validation OEM/ODM ready with full dimensional compliance to ISO 12240-1:2022 for immediate drop-in replacement across existing wind and mining platforms

Inquiry View

Rod end bearing

POS25 rod end bearing with self-lubricating design for hydraulic cylinders

Stop hydraulic cylinder downtime caused by lubrication failure or misalignment wear — the POS25 rod end bearing with self-lubricating design for hydraulic cylinders delivers consistent, maintenance-free articulation even under shock loads and extreme duty cycles. Built for construction machinery and forging applications where re-lubrication access is impossible, it eliminates grease port clogging and seal degradation risks common in conventional rod ends. Self-lubricating PTFE-lined inner ring ensures zero-maintenance operation for >10,000 cycles without external grease — critical for sealed hydraulic systems Radial spherical plain bearing geometry with 25mm bore and M24×2 thread enables precise angular misalignment compensation (±12°) while sustaining 72,700 N static load Whole outer ring construction prevents edge loading and premature raceway spalling — a known failure mode in split-ring alternatives under high-cycle bending Weighs just 0.65 kg yet meets SKF-compatible dimensional specs (25×124×31 mm), so retrofitting takes minutes, not engineering reviews

Inquiry View

Rod end bearing

304 Stainless Steel Rod End Bearings – Corrosion-Resistant for Heavy-Duty Industrial Use

Stop bearing failures in corrosive, high-load environments — especially where salt, moisture, or chemical exposure compromise standard rod ends. Our 304 stainless steel rod end bearing delivers uninterrupted articulation and load-carrying stability even under cyclic shock loads and wide-angle misalignment — a critical advantage for wind turbine pitch systems and mining equipment linkages. Features hydrodynamic lubrication with thin-film capability — enabling reliable operation without external grease ports or frequent re-lubrication Self-lubricating bushing paired with 304 stainless steel housing and sliding contact (steel-on-steel) ensures long service life without galling Rated for combined thrust and radial loads — verified per ISO 12233 static load capacity methodology Supplied in neutral packaging with full traceability, backed by SKF-certified engineering support for custom mounting or retrofit validation

Inquiry View

Rod end bearing

POS20 Rod End Bearing – Self-Lubricating for Hydraulic Cylinders & Construction Machinery

Stop downtime from lubrication failure in hydraulic cylinders and heavy-duty construction machinery — the POS20 rod end bearing delivers consistent, maintenance-free articulation even under shock loads and misalignment. Engineered for reliability where grease ports clog or service access is impossible, it’s the go-to self-lubricating solution trusted by OEMs building equipment for wind farms, mining sites, and high-cycle automation lines. Self-lubricating PTFE liner eliminates relubrication intervals — critical for sealed hydraulic rod ends and buried mounting positions 20 mm inner diameter with M20×1.5 right-hand thread — matches standard cylinder rod interfaces without adapters Radial spherical plain design handles ±15° angular misalignment while sustaining 35,500 N static load 25 mm thickness and whole outer ring construction resist edge loading in compact, high-stress linkages

Inquiry View

Rod end bearing

PHS POS Steel Bronze Rod Ends Spherical Plain Bearings for High-Load Wind Turbine Applications

Keep wind turbine pitch systems running reliably under extreme cyclic loads — without scheduled relubrication or premature wear failures. The PHS POS steel bronze rod end is engineered specifically for high-moment, low-speed articulation in nacelle and blade root joints, where traditional spherical plain bearings often fail due to film breakdown or galling. Thin-film hydrodynamic lubrication maintains consistent load distribution even during stop-start motion — critical for pitch control accuracy over 20+ years Steel-on-steel sliding contact with self-lubricating bronze liner eliminates dependency on external grease ports and avoids contamination ingress in offshore environments 100×150×90 mm geometry matches OEM mounting envelopes while delivering >15% higher static load rating than standard ISO 12240-1 Class E equivalents OEM/ODM support includes custom raceway hardening and laser-etched traceability — backed by our in-house SKF-certified bearing engineers

Inquiry View

Rod end bearing

PHS12 Spherical Plain Bearing – Self-Lubricating Rod End for Hydraulic Cylinders

Stop hydraulic cylinder downtime caused by lubrication failure or misalignment—this PHS12 rod end delivers consistent, maintenance-free articulation even under heavy radial loads and frequent oscillation. Built for construction machinery and automation systems where reliability trumps replacement speed, it eliminates the need for scheduled greasing while resisting edge loading better than standard rod ends thanks to its whole outer ring design. Self-lubricating PTFE-lined bearing steel construction — no relubrication ports, no grease contamination risk M12×1.75 right-hand thread with 16mm thickness — matches OEM mounting specs for direct retrofit into hydraulic rams Static load capacity of 169 kN — engineered for shock-absorbing duty in excavators and forging presses 12×65×16mm compact profile — preserves stroke length without sacrificing strength

Inquiry View

Rod end bearing

SI8T/K PHSA8 Right-Hand Female Thread Rod End Bearing for High-Load Industrial Applications

Stop bearing failures in high-load, oscillating joints—especially where misalignment, extreme loads, or harsh environments compromise uptime in wind power gearboxes, steel mill linkages, or mining equipment. The SI8T/K PHSA8, rod end bearing delivers consistent hydrodynamic performance under sustained thrust-and-radial loads, thanks to its steel-on-steel sliding contact with thin-film lubrication—no external grease ports needed, just reliable boundary lubrication even during intermittent motion. Right-hand female thread allows direct integration into existing OEM control rods and tie-rod assemblies without adapters Self-lubricating bushing eliminates scheduled relubrication downtime—critical for inaccessible or safety-restricted installations 100×150×90 mm mounting envelope matches common SKF-compatible actuation interfaces across global wind turbine pitch systems Neutral packing + carton pallet shipping ensures damage-free delivery to your plant floor—no rework from crushed boxes or bent threads

Inquiry View

Rod end bearing

SI10E SIKAC10M/VZ019 spherical rod end bearing for hydraulic cylinders

Stop hydraulic cylinder downtime before it starts — this SI10E rod end bearing delivers consistent angular articulation under shock loads and misalignment, even in high-cycle forging and construction machinery applications. Unlike standard radial spherical bearings, its non-self-lubricating design allows precise grease selection (including high-temperature synthetic greases) and avoids premature washout in wet or high-pressure environments. Rated P4 precision for automotive shock absorber assemblies where ±2µm runout directly impacts ride calibration 5mm thickness with whole outer ring structure — critical for maintaining load distribution across the spherical contact surface during side-loading Ready-to-ship from Shanghai with 100% on-time delivery and technical support from SKF-certified engineers Compatible with OEM service intervals: accepts both grease and oil lubrication without seal modification

Inquiry View

Rod end bearing

Corrosion-Resistant Ball Joint Bearing for Heavy-Duty Industrial Applications

Stop bearing failures in humid, abrasive, or chemically aggressive environments—this corrosion-resistant ball joint bearing delivers uninterrupted uptime where standard joints degrade fast. Built for mining conveyors, wind turbine pitch systems, and steel mill linkages, it eliminates unplanned shutdowns caused by surface pitting and galling under high-load, low-speed oscillation. Steel-on-steel sliding contact — precision-ground and phosphate-coated for consistent torque and zero stick-slip, even after 500k+ cycles 100 × 150 × 90 mm compact profile fits legacy SKF mounting interfaces without redesign OEM/ODM support includes custom grease ports, laser-etched traceability, and ISO 9001-certified batch documentation Shipped on palletized cartons with humidity-controlled desiccant — ready for direct line-side staging

Inquiry View

Rod end bearing

Si20c Si20es Si20es-2RS spherical plain rod end bearing for hydraulic cylinders

Stop hydraulic cylinder downtime caused by premature rod end wear—especially in high-cycle construction and forging applications where misalignment and contamination are constant challenges. These Si20c Si20es Si20es-2RS spherical plain rod end bearing deliver exceptional angular misalignment compensation (up to ±15°) and maintain load integrity under shock loads, thanks to their hardened bearing steel outer ring with a precision-ground convex inner surface. Optimized for grease lubrication with sealed 2RS options—critical for extended service life in dusty, high-humidity environments Available in P0–P2 precision grades, including vibration-rated Z2V2 for smooth operation in sensitive automation and water conservancy systems Exact 20×54×16 mm metric dimensions—drop-in compatible with standard SKF-mount hydraulic cylinders and OEM equipment Rich stock + 100% on-time delivery means no project delays waiting for critical spares

Inquiry View