Roller bearing

Roller bearing

Spherical Roller Bearings 22308E–22311E for High-Load Wind Turbines

Keep wind turbine gearboxes running reliably under extreme cyclic loads and misalignment — without unplanned downtime or costly retrofitting. This spherical roller bearing is engineered specifically for high-torque main shaft and gearbox applications where standard C0 clearance and P0 precision fall short. C3 radial internal clearance + P6 precision ensures optimal preload stability across wide temperature swings — critical for offshore and inland wind farms with rapid ambient shifts Double-row, self-aligning design accommodates up to 2.5° static misalignment — preserving raceway integrity even with foundation settling or nacelle flex 40×90×33 mm dimensions match OEM mounting envelopes for direct replacement of SKF 22308E in GE 1.5 MW and Goldwind GW115 platforms Through-hardened bearing steel (ISO 683-17) with optimized roller profile reduces edge loading by 37% vs. generic equivalents — verified via contact stress mapping

Inquiry View

Roller bearing

Tapered Roller Bearings 32310–30205 for Heavy-Duty Truck Axles

Extend axle service life and eliminate unplanned downtime on heavy-duty truck fleets — even under continuous high-load, high-speed operation. Our genuine SKF tapered roller bearing for heavy-duty applications delivers unmatched radial and axial load capacity with precision-matched inner/outer rings and optimized contact geometry. Exact OEM-spec dimensions: 75 × 130 × 33.25 mm — critical for proper preload and thermal expansion control in tandem axle setups P0–P2 precision grades available; Z2V2 vibration rating standard — ensures smooth, quiet operation at highway speeds Pre-lubricated with high-temperature lithium complex grease (compatible with oil bath systems) Separable design allows independent mounting of cone and cup — simplifies field maintenance without full axle disassembly

Inquiry View

Roller bearing

Cylindrical Roller Bearing NN3014–NN3016 for High-Speed Industrial Applications

Extend bearing life and reduce unplanned downtime in high-speed, high-load applications — especially where thermal expansion and misalignment stress conventional rollers. Our SKF NN3014 cylindrical roller bearing for wind turbines delivers precision P5 runout control and optimized roller profile geometry to handle axial displacement without cage distortion — a critical advantage over standard NN-series designs. Radial load capacity up to 215 kN (NN3014), with separable inner/outer rings for faster maintenance P0–P2 precision grades available; P5 is standard — essential for mining gearboxes and turbine main shafts Open design with oil/grease compatibility and V3 vibration rating for smooth high-RPM operation 70 × 110 × 30 mm bore-OD-width dimensions, manufactured to ISO 9001/TS 16949 with full traceability

Inquiry View

Roller bearing

FAG 22220CCK Spherical Roller Bearing for High-Load Wind Turbine Applications

Keep offshore wind turbines running at peak uptime—even under extreme misalignment and shock loads—thanks to the FAG 22220CCK spherical roller bearing’s integrated tapered bore and C3 clearance, engineered specifically for generator main shafts in harsh marine environments. 100 × 180 × 46 mm dimensions with double-row, self-aligning geometry handle dynamic radial + axial loads without premature edge stress German-made bearing steel (100% traceable to FAG’s Schweinfurt plant) ensures consistent hardness profile across rollers and raceways—critical for avoiding micro-pitting in low-speed, high-torque applications OEM-certified P5 precision grade available on request, with full ISO 9001/TS 16949 documentation for your maintenance audit trail Pre-lubricated with SKF LGEP 2 grease and sealed in vacuum-packed cartons—no field re-greasing needed before installation

Inquiry View

Roller bearing

High Precision Double Row Cylindrical Roller Bearings for Wind Turbine Gearboxes

Extend gearbox uptime and cut unplanned maintenance in wind turbines with this high precision double row cylindrical roller bearing — engineered for the extreme radial loads and continuous duty cycles that cause premature failure in standard bearings. Features NN3010K geometry with optimized roller profile and P4 precision class — critical for minimizing cage skew and micro-sliding under high-speed, low-lubrication conditions Separable design allows quick inner ring replacement without disturbing gearbox alignment — saving hours during field service Bearing steel rings with V3 vibration grade ensure smooth operation at 1,800+ rpm, even after 20,000+ hours of continuous wind turbine service OEM-tested for compatibility with synthetic gear oils and sealed against moisture ingress in offshore nacelles

Inquiry View

Roller bearing

Single Row Cylindrical Roller Bearing NJ205–NJ210 for High-Speed Industrial Applications

Keep high-speed industrial gearboxes running longer with fewer unplanned stops — especially in wind turbine applications where bearing reliability directly impacts energy yield and service costs. The NJ205 cylindrical roller bearing delivers precision radial load capacity at sustained speeds, backed by SKF-equivalent engineering and our ISO 9001/TS 16949-certified quality control. Single-row, non-aligning design with separable inner ring — simplifies mounting and maintenance in tight gearbox housings Available in P0 to P2 precision grades; standard NJ205 runs at 25 × 52 × 15 mm with hardened bearing steel rollers and raceways Open configuration supports oil, grease, or dry-lubrication schemes — critical for sealed wind turbine gearboxes requiring long-life lubricant compatibility OEM/ODM support includes custom cage materials and surface treatments for extreme-load cycling

Inquiry View

Roller bearing

Cylindrical Roller Bearing N2205 for Low-Noise Industrial Applications

Reduce operational noise and extend service life in demanding radial-load applications — especially where vibration sensitivity impacts wind turbine gearbox reliability or precision machinery uptime. This cylindrical roller bearing, N2205 bearing delivers P5 precision ground rollers with Z2V2 low-vibration grading, a detail critical for minimizing cage-induced resonance in high-speed, continuous-duty cycles. Radial load capacity optimized for 15–90 mm bore shafts — compatible with standard SKF N2205 replacement mounting Non-aligning, separated design enables easier installation and maintenance in tight-access industrial gearboxes Grease- or oil-lubricated; ready for integration into predictive maintenance programs with ISO 2372-compliant vibration baselines Bearing steel construction with strict dimensional control across outer diameters (35–180 mm) ensures consistent thermal expansion behavior under cyclic loading

Inquiry View

Roller bearing

Conical Roller Bearing 32907 (35×55×14 mm) for Heavy-Duty Truck Axles

Extend axle service life and cut unplanned downtime in heavy-duty truck fleets — even under continuous high-load, high-speed operation. The 32907 bearing delivers proven SKF-compatible performance for demanding applications where misalignment tolerance and radial-thrust load sharing matter most. Exact 35×55×14 mm dimensions with P5 precision grade option — critical for maintaining preload integrity in dual-bearing axle assemblies Lubrication-ready for both grease and oil systems, with Z2V2 low-noise vibration rating to support predictive maintenance programs OEM/ODM support backed by our in-house SKF-certified engineering team — no more waiting weeks for custom fitment validation Shipped in protective cartons (7.5×7.5×3.4 cm, 0.115 kg) — optimized for just-in-time warehouse staging and line-side replenishment

Inquiry View

Roller bearing

Tapered Roller Bearings 30222–31326 for High-Load Industrial Applications

Extend bearing life and reduce unplanned downtime in high-load industrial gearboxes, wind turbine pitch systems, and mining conveyors — without compromising on precision or delivery speed. Our tapered roller bearings are engineered for real-world reliability where radial + axial combined loads demand zero margin for error. SKF 30222 bearing for wind turbines — fully compatible with OEM mounting dimensions and preload specs (110×200×41 mm, P5/P6 precision grades available) Non-aligning, separated design enables rapid field replacement — critical when mill uptime is measured in minutes Optimized roller profile and surface finish deliver low noise at sustained 3000+ rpm under 250 kN dynamic load Rich stock of genuine-spec units (BDL-manufactured, ISO 9001/TS 16949 certified) ships same-day from Shanghai

Inquiry View

Roller bearing

NJ312 Cylindrical Roller Bearing for Farm Machinery – High-Load Radial Support

Keep your farm machinery running longer under heavy, variable loads — without unexpected downtime or premature bearing failure. The NJ312 cylindrical roller bearing delivers rock-solid radial support for tractors, harvesters, and balers where shock loads and misalignment tolerance matter most. 60 × 130 × 31 mm dimensions — precise fit for OEM shaft and housing interfaces in Tier-1 agricultural gearboxes Separated design allows easy mounting and dismounting, critical when field service time is measured in minutes Bearing steel construction with P5 precision option ensures consistent performance at sustained high speeds and elevated temperatures Open configuration enables full compatibility with your existing oil or grease lubrication system — no retrofitting needed

Inquiry View

Roller bearing

Long-Life Spherical Roller Bearing 22318CA for Heavy-Duty Industrial Applications

Extend uptime and cut unplanned maintenance in demanding applications — the long-life spherical roller bearing 22318CA delivers exceptional load-carrying capacity and misalignment tolerance, even under shock loads and thermal cycling common in mining conveyors and wind turbine gearboxes. Features asymmetric roller profiling and case-hardened bearing steel (not standard through-hardened) — a critical differentiator for fatigue life in high-load, low-speed oscillating conditions Available in P5/P4 precision grades and C3/C4 clearance options to match exact application dynamics and thermal expansion requirements OEM/ODM support backed by our in-house SKF-certified engineering team — including custom cage design and surface treatments for extreme environments Supplied with ISO 9001/TS 16949 traceable documentation and global logistics coordination for seamless integration into your production or MRO schedule

Inquiry View

Roller bearing

Spherical Roller Bearing 22318CAK – High-Load Self-Aligning for Wind Turbines

Keep wind turbines running at peak uptime—even under extreme misalignment and dynamic loads—thanks to the spherical roller bearing 22318CAK, engineered for renewable energy applications where failure isn’t an option. Features a carburized case-hardened bearing steel raceway (not just through-hardened), delivering superior surface fatigue resistance in high-cycle, low-lubrication turbine gearboxes Self-aligning design tolerates up to 2.5° static misalignment—critical when foundation settling or thermal expansion shifts rotor alignment over time Available in P5 precision with C3 clearance as standard, optimized for preloaded main shaft assemblies requiring tight thermal growth compensation Supplied with SKF-certified dimensional and metallurgical traceability, backed by our in-house bearing engineers for application validation

Inquiry View