Imported brand bearing

Imported brand bearing

SKF 6002-2RS deep groove ball bearing for high-speed industrial applications

Trust your high-speed industrial systems to run longer, smoother, and with fewer unplanned stops — the SKF 6002-2RS delivers proven reliability where uptime is non-negotiable. Engineered for wind power gearboxes, steel mill conveyors, and precision OEM machinery, it handles radial loads up to 5.8 kN while maintaining low friction at 24,000 rpm (with grease lubrication and proper cooling). Sealed with dual contact rubber lips (2RS) — retains high-performance SKF LGMT 2 grease and blocks dust/moisture ingress better than standard shields 15 × 32 × 9 mm dimensions with P5 precision option available — fits tight-tolerance retrofits without redesign Made from vacuum-melted bearing steel (100Cr6), heat-treated to 60–62 HRC for consistent fatigue resistance in cyclic loading Shipped in vibration-controlled carton pallets — zero field reports of micro-pitting on arrival, even after ocean freight

Inquiry View

Imported brand bearing

Deep Groove Ball Bearings 6815/6816/6817 for Automotive Applications

Extend service life and reduce unplanned downtime in high-speed automotive drivetrain applications — especially where thermal stability and consistent rotational precision are non-negotiable. These SKF 6815 bearing, 6816, and 6817 deep groove ball bearings deliver factory-matched P5 precision grading and optimized C3 clearance for real-world thermal expansion in engine-mounted accessories and transmission idler shafts. Engineered with 0° contact angle and hardened GCr15 bearing steel for true radial load handling without axial skew Available in three standard sizes: 75×95×10 mm, 80×100×10 mm, and 85×110×13 mm — all with unseparated, non-aligning construction Pre-lubricated with high-temperature synthetic grease (or oil-compatible) for immediate drop-in installation Backed by our in-house SKF-certified engineering support — including failure root-cause analysis and custom preload recommendations

Inquiry View

Imported brand bearing

Single Row Deep Groove Ball Bearing 6218-2RS1/C3 for High-Speed Industrial Applications

Extend bearing life and reduce unplanned downtime in high-speed, high-load applications — especially where thermal expansion or misalignment stress threatens reliability. The SKF 6218-2RS1/C3 bearing delivers proven performance in wind turbine gearboxes, steel mill drives, and precision CNC spindles thanks to its C3 internal clearance and dual-contact RS1 seals that retain grease under dynamic load while resisting contamination. 90 × 160 × 30 mm dimensions — exact OEM replacement for legacy 6218-series installations Sheet metal cage with optimized pocket geometry for high-RPM stability (critical for >3,000 rpm continuous operation) Pre-lubricated with SKF LGEP 2 grease — no initial relubrication needed, reducing commissioning time Manufactured to ISO 9001/TS 16949 standards across Germany, Sweden, and certified Chinese production lines

Inquiry View

Imported brand bearing

SKF Cylindrical Roller Bearings N2203EM–N2205EM for high-speed radial load applications

Extend bearing life and reduce unplanned downtime in high-speed radial load applications — especially where thermal expansion, misalignment sensitivity, or harsh duty cycles have caused repeated failures. These genuine SKF cylindrical roller bearing units (N2203EM–N2205EM) are engineered for wind power gearboxes and mining conveyor drives that demand precision radial stiffness *and* controlled internal clearance under rapid acceleration. Non-aligning, separated design allows independent mounting of inner/outer rings — critical for accurate shaft-to-housing alignment in multi-bearing assemblies Available in P0 through P2 precision classes, with EM suffix indicating optimized internal geometry and surface finish for speeds up to 12,000 rpm (at dm = 28.5 mm) Open configuration enables field-selectable lubrication — oil, grease, or dry-running — without seal interference Made from vacuum-melted bearing steel, heat-treated to ≥60 HRC, and manufactured in Japan to ISO 9001/TS 16949 standards

Inquiry View

Imported brand bearing

SKF 22312EAE4 Spherical Roller Bearing for High-Load Wind Turbine Applications

Extend bearing life and reduce unplanned downtime in demanding wind turbine main shaft applications — the SKF 22312EAE4 spherical roller bearing delivers proven reliability where misalignment, shock loads, and thermal growth are non-negotiable challenges. Features genuine SKF C3 radial internal clearance — critical for accommodating shaft expansion in high-power nacelle environments Double-row, self-aligning design with P5 precision grade ensures consistent rotational accuracy under dynamic load reversals Manufactured in Sweden to ISO 9001/TS 16949 standards, with case-hardened bearing steel and optimized roller profile geometry Supplied unseparated with standard carton/pallet packaging — ready for immediate integration into OEM assembly lines or retrofit campaigns

Inquiry View

Imported brand bearing

SKF Pillow Block Bearings FY15TF–FY35TF for High-Load Industrial Applications

Stop bearing failures in high-load applications—especially where misalignment, shock loads, or extended maintenance cycles strain standard pillow blocks. Our SKF pillow block bearing FY15TF–FY35TF series delivers proven P5 precision and deep groove raceway geometry that maintains radial load capacity even under dynamic misalignment—critical for wind turbine yaw systems and steel mill conveyors. Single-row insert design with P-bearing block housing (model “P”) for rapid field replacement without shaft disassembly Genuine SKF bearing steel construction, manufactured in Sweden to ISO 9001/TS 16949 standards Available in P0, P6, P5, and P4 precision grades—P5 is specified for high-speed wind power gearboxes requiring ≤3μm radial runout Pre-greased for immediate installation; compatible with oil lubrication for continuous-duty industrial environments

Inquiry View

Imported brand bearing

SKF 6216 2RSC3 Deep Groove Ball Bearing – Sealed for High-Speed Industrial Use

Extend bearing life and reduce unplanned downtime in high-speed, continuous-duty applications — especially where contamination or thermal cycling threatens reliability. The SKF 6216 bearing delivers proven sealing integrity with its dual-contact 2RSC3 rubber seals, a critical advantage over standard single-lip designs when operating near wind turbine gearboxes or steel mill conveyors. 80 × 140 × 26 mm dimensions — exact OEM replacement for legacy 6216 2RSC3 installations Sheet metal cage + hardened bearing steel construction ensures consistent high-RPM stability Pre-greased and sealed for maintenance-free operation — no relubrication ports required Lead time as short as 3 days for urgent replacements, backed by ISO 9001/TS 16949 certified quality control

Inquiry View

Imported brand bearing

SKF N309EM cylindrical roller bearing for high-load industrial applications

Extend bearing life and reduce unplanned downtime in demanding high-load applications — especially where misalignment or thermal expansion would compromise standard cylindrical roller bearings. The SKF N309EM delivers exceptional radial load capacity with P6 precision and a non-separable, open-type design that allows for optimized grease replenishment during service — a critical advantage for wind power gearboxes and mining conveyor drives. Exact dimensions: 45 × 100 × 25 mm — fits OEM mounting interfaces without retrofitting Manufactured in Sweden from vacuum-melted bearing steel, ensuring consistent hardness and fatigue resistance P6 precision rating enables tighter shaft fits and higher rotational stability under dynamic loads Separated, single-row cylindrical construction supports easy inspection and re-lubrication in field maintenance

Inquiry View

Imported brand bearing

Timken NTN 6702-2RS Deep Groove Ball Bearing for High-Speed Industrial Applications

Keep critical high-speed equipment running longer with less unplanned downtime — especially in demanding wind power and steel mill applications where bearing failure means costly production halts. The 6702-2RS bearing delivers precision P5-grade radial stiffness and low-vibration Z2V2 performance in a compact 15×21×4 mm grease-lubricated deep groove ball bearing, engineered for consistent rotational accuracy under thermal cycling and variable loads. Single-row, non-aligning design ensures rigidity in fixed-position shafts — ideal for gearbox input stages and rolling mill auxiliary drives Grease-lubricated from factory with optimized fill volume and NLGI #2 lithium complex — eliminates early-life lubrication errors common in field assembly Compatible with TIMKEN/KOYO/NTN interchange specs, backed by our in-house SKF-certified engineering support for application validation Manufactured to ISO 9001 and TS 16949 standards, with full traceability and batch-tested dimensional stability

Inquiry View

Imported brand bearing

Heavy-Duty Deep Groove Ball Bearing for High-Speed Auto Motors

Engineers building high-speed electric vehicle motors get smoother rotor dynamics, longer service life, and fewer unplanned shutdowns — even under continuous 18,000 rpm operation. This SKF deep groove ball bearing is purpose-built for automotive traction motors where P4 precision, low vibration (Z2V2 grade), and consistent grease retention are non-negotiable. Radial + axial load capacity in a single compact design — eliminates need for tandem arrangements in space-constrained motor housings P4 tolerance class with optimized internal clearance (C3) for thermal growth in EV inverter-driven applications Pre-lubricated with SKF LGHP 2 grease — formulated for >15,000 hr life at 120°C without relubrication Unseparated construction ensures rapid, repeatable mounting on shafts with tight interference fits

Inquiry View

Imported brand bearing

SKF deep groove ball bearings 6707-2RS to 6919-2RS for high-speed industrial applications

Extend bearing life and cut unplanned downtime in high-speed industrial gear—especially where thermal stability and precision alignment matter most. Our SKF deep groove ball bearing series (6707-2RS to 6919-2RS) delivers factory-fresh P4 precision, Z2V2 low-vibration grading, and genuine SKF steel integrity—backed by ISO 9001/TS 16949 certified quality control. Optimized for wind turbine pitch systems and steel mill roll stands—where even minor runout accelerates cage wear Double-sealed 2RS design with optimized grease fill volume for extended relubrication intervals at 15,000+ rpm P4 tolerance grade ensures ≤1.5 µm radial runout—critical when paired with high-frequency vibration monitoring Japan-origin bearing steel with controlled carbide dispersion for fatigue resistance under cyclic shock loads

Inquiry View

Imported brand bearing

SKF SNL510-608 Pillow Block Bearing Housing for High-Load Industrial Applications

Stop bearing housing failures in high-load, continuous-duty applications — especially where misalignment, thermal expansion, or heavy vibration threaten uptime. The SKF SNL510-608 pillow block bearing housing delivers proven reliability in wind power gearboxes, steel mill conveyors, and mining crushers — precisely where standard housings crack under cyclic load. Carbon steel construction with precision-machined 90mm bearing seat ensures optimal fit and load distribution for ISO 608-series spherical roller bearings Centre height of 60mm and 170mm bolt hole spacing match OEM mounting patterns — no retrofitting or adapter plates needed Includes pre-drilled, tapped M12 attachment points (12mm bolt diameter) — a detail critical for maintaining alignment during repeated maintenance cycles Shipped in protective wooden boxes with verified 3.42kg net weight — so your logistics team receives exactly what’s ordered, every time

Inquiry View