Ball bearing

Ball bearing

Thrust Ball Bearings 51114–51414 for Agricultural Machinery – High-Load, Precision-Matched

Keep your agricultural machinery running reliably under heavy, variable loads — without unplanned downtime or premature bearing failure. These thrust ball bearing models (51114–51414) are precision-matched for consistent axial load distribution across demanding farm equipment applications, directly addressing the fatigue and misalignment risks common in high-cycle tillage, harvesting, and loader systems. Single-row, non-aligning design with zero contact angle — optimized for pure axial thrust, not radial loads Available in P0 to P2 precision grades and Z1V1–Z3V3 vibration classes for mission-critical OEM integration 70×95×18 mm dimensions (51114) — a critical fit size for major tractor transmission and PTO assemblies Grease- or oil-lubricated, separated construction enables fast field service and contamination-resistant reassembly

Inquiry View

Ball bearing

High-Load Crane Hook Thrust Ball Bearings 51330–51340 for Heavy-Duty Lifting

Stop crane hook downtime caused by premature thrust bearing failure — especially under shock loads and misalignment in heavy-lift cycles. Our SKF-compatible high-load thrust ball bearing delivers proven reliability for demanding industrial lifting, including wind turbine nacelle hoisting and steel mill overhead cranes. Rated for continuous axial loads up to 420 kN (51340 model) — verified with Z2V2 low-noise vibration grade for smoother, longer service life Precision options from P0 to P2 let you match bearing tolerance to your application’s thermal expansion and preload requirements Separated design allows easy installation on fixed shafts without disassembling the entire hook assembly In-stock availability + dedicated technical support from SKF-certified engineers in Shanghai ensures rapid deployment and field validation

Inquiry View

Ball bearing

Thrust Ball Bearings 51204/51304/51105 for Automotive & Motorcycle Applications

Engineers building or repairing automotive and motorcycle transmissions get smoother, longer-lasting axial load handling — without compromising precision or risking premature failure under dynamic loads. These thrust ball bearing models (51204/51304/51105) are engineered for high-precision applications where zero contact angle and strict vibration class compliance (Z2V2 or better) directly impact gear engagement stability and NVH performance. We supply them with P5 precision grade as standard — a critical differentiator for transmission OEMs who reject runout-induced shimming adjustments in final assembly. In stock and ready to ship globally — no 12-week lead times on genuine-spec thrust bearings Separable design allows for easier installation in tight transmission housings Grease- or oil-lubricated; compatible with synthetic ester-based transmission fluids Bearing steel rings with ISO 9001-certified heat treatment — verified via microhardness mapping

Inquiry View

Ball bearing

High Precision 6015 Deep Groove Ball Bearing for Farm Machinery

Keep your farm machinery running longer under heavy loads and dusty field conditions — without unexpected downtime or premature bearing failure. The High Precision 6015 Deep Groove Ball Bearing for Farm Machinery delivers SKF-certified reliability in a 75×115×20 mm radial bearing built for tractors, balers, and combines that demand consistent rotational accuracy at variable speeds. Available in P0–P4 precision grades — choose P5 or P4 if your application requires ≤0.008 mm radial runout tolerance (critical for high-speed PTO shafts) Non-aligning, unseparated single-row design ensures rigidity under combined radial + moderate axial loads — no false brinelling from misalignment in vibrating chassis mounts Grease- or oil-lubricated with Zz/2RS sealing options to match your maintenance cycle and contamination exposure level Made from vacuum-melted bearing steel (not standard rolled stock) for fatigue resistance in stop-start field operations

Inquiry View

Ball bearing

High Load Thrust Ball Bearings 51110–51115 for Wind Turbine Applications

Keep wind turbine main shafts running reliably under extreme axial loads—without unexpected downtime or costly retrofitting. These thrust ball bearings are engineered specifically for the harsh, high-cycle demands of modern wind power applications, where precision alignment and consistent load distribution directly impact O&M cost and service life. Grease-lubricated single-row design with P5 precision rating—critical for minimizing heat buildup in slow-rotating, high-thrust scenarios Non-aligning, separated construction allows for precise preload adjustment during installation—a must for gearbox and pitch control assemblies Available in full 51110–51115 series (e.g., 51112: 60×90×18 mm) with Z2V2 low-noise vibration grade for quieter, smoother operation In stock and backed by SKF-certified engineering support—from application review to failure analysis

Inquiry View

Ball bearing

S6203 S6204 S6205 low noise deep groove ball bearings for automotive applications

Eliminate engine noise and extend service life in high-revving automotive applications — these low-noise deep groove ball bearings deliver the smooth, quiet rotation critical for modern powertrains. Built to SKF-compatible tolerances and optimized for radial load stability, the S6205 bearing is part of a precision-matched series (S6203/S6204/S6205) engineered specifically for OEM-grade reliability in tight-tolerance engine compartments. Features ABEC-7 grade steel races and micro-ground raceways — a detail that directly reduces vibration-induced wear in continuous-duty cycles Pre-lubricated with high-temperature synthetic grease, eliminating early dry-run failures common in stop-start urban driving Unseparated single-row design ensures consistent preload retention under thermal cycling — no disassembly needed during assembly 25×52×15mm dimensions meet strict space constraints in alternator, water pump, and timing belt idler assemblies

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 2316K-2RS for Wind Turbines & Heavy Machinery

Keep wind turbines and heavy machinery running longer with minimal downtime — this self-aligning ball bearing 2316K-2RS delivers proven misalignment tolerance up to ±2.5°, critical for gearboxes and main shafts where thermal expansion or frame deflection would otherwise accelerate wear. 95×170×32 mm dimensions with double-row radial design and integrated rubber seals (2RS) — ready for immediate replacement in legacy SKF installations Available in P5 precision and C3 clearance variants — essential for high-speed wind turbine applications demanding tight tolerances and thermal stability Steel or brass cage options, pre-lubricated with high-temperature grease — no field relubrication needed during initial commissioning Built to ISO 9001/TS 16949 standards, backed by our in-house SKF-certified engineers for failure analysis and custom modification

Inquiry View

Ball bearing

Long-Lived 6024-RS Deep Groove Ball Bearing for Low-Noise Industrial Applications

Extend uptime and cut maintenance costs in demanding industrial environments — the 6024-RS bearing delivers exceptional longevity and ultra-low noise even under sustained radial loads. Engineered for precision applications where vibration-induced fatigue or premature wear has derailed reliability, it’s a drop-in SKF-compatible 120×180×28mm radial bearing built with optimized internal clearance (C3) and high-purity bearing steel raceways. Single-row deep groove ball design with dual rubber seals (2RS) for superior contamination exclusion Pre-lubricated with low-noise synthetic grease — no initial oiling needed, reducing commissioning time ISO 9001:2008 certified manufacturing, with batch traceability for critical OEM deployments Ships in protective packaging: 20×20×4.8 cm, 2.06 kg — ready for global logistics integration

Inquiry View

Ball bearing

6212 Deep Groove Ball Bearing 55×100×21mm, C4 Clearance for High-Speed Applications

Keep high-speed wind turbine gearboxes running smoothly—without unplanned downtime or premature bearing failure. This 6212 bearing is engineered specifically for sustained radial loads at elevated rotational speeds, where standard C3 clearance would risk thermal lock-up and cage distortion. Features genuine C4 radial internal clearance—critical for maintaining optimal preload as temperature rises in continuous high-RPM operation Manufactured to P5 precision with Z2V2 low-noise vibration grade, ensuring quiet, stable performance in sensitive powertrain applications Non-aligning, single-row deep groove design delivers maximum rigidity under combined radial + light axial loads—ideal for gearbox input shafts Supplied unseparated with optional ZZ/2RS sealing and grease or oil lubrication compatibility, ready for OEM integration

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 1207 for High-Speed Industrial Applications

Keep wind turbines and high-speed industrial gear running smoothly—without unplanned downtime or costly misalignment repairs. This self-aligning ball bearing 1207 bearing delivers proven angular misalignment tolerance up to 2.5°, a critical advantage when shaft deflection or mounting imprecision threatens bearing life in demanding applications. Brass cage option ensures superior high-speed stability and reduced friction heat—essential for continuous-duty wind turbine gearboxes Precision grades P0–P2 and clearance options C0–C4 let you match exact OEM or retrofit specs Double-row radial design with 60° contact angle handles combined radial loads and moment forces without compromising alignment 35 × 72 × 17 mm dimensions and ISO-standard geometry ensure seamless drop-in replacement across global equipment fleets

Inquiry View

Ball bearing

Deep Groove Ball Bearing 6020 100x150x24mm with Dual Rubber Seals

Extend bearing life and reduce unplanned downtime in demanding rotating equipment — especially where dust ingress, moisture, or frequent relubrication would normally compromise performance. The Deep Groove Ball Bearing 6020 100x150x24mm with Dual Rubber Seals delivers immediate reliability gains for wind turbine yaw systems, mining conveyor idlers, and steel mill roll stands. True low-maintenance operation: dual nitrile rubber seals (2RS) + pre-filled high-temperature lithium grease eliminate the need for external relubrication ports — critical where access is restricted or contamination risk is high P5 precision grade option available — essential for minimizing vibration-induced fatigue in high-speed applications above 1,800 rpm Non-separable, single-row radial design ensures consistent preload stability under combined loads — a key factor often overlooked in retrofit scenarios Manufactured to ISO 9001/TS 16949 standards with full traceability, matching OEM fit and function for SKF 6020 bearing replacements

Inquiry View

Ball bearing

Thrust Ball Bearings 51201/51102/51202 for Automotive Applications

Extend bearing life and eliminate premature thrust failure in high-speed automotive drivetrains — even under aggressive acceleration, frequent stops, and thermal cycling. Our thrust ball bearing delivers ISO9001-certified precision with P5 tolerance class as standard (P4/P2 available), ensuring axial rigidity that OEM-spec replacements often miss. Single-row, separated design allows for easier mounting and precise preload adjustment — critical for transmission and clutch release applications 12 × 28 × 11 mm dimensions match SKF 51201 replacement requirements exactly, including raceway curvature and ball complement geometry Grease- or oil-lubricated; compatible with synthetic EP greases used in modern CVT and DCT systems In stock and backed by Eurasia Smart’s 15+ certified bearing engineers — ready for technical validation or custom preload testing

Inquiry View