Ball bearing

Ball bearing

Rodamiento de bolas de ranura profunda 16038 de alta calidad para aplicaciones industriales de alta velocidad

Keep critical high-speed equipment running longer with zero unplanned downtime — the 16038 bearing delivers unmatched rotational stability under sustained 3,200 rpm loads and thermal cycling common in wind turbine main shafts and steel mill roll stands. Radial stiffness optimized via precise 0° contact angle and hardened GCr15 bearing steel — a must for minimizing axial drift in misaligned frames 190×290×31mm dimensions match OEM mounting envelopes while supporting dynamic loads up to 315 kN (Cr) Pre-greased or oil-lubrication ready — no field relubing during commissioning, reducing startup risk Backed by SKF-certified engineering support: application review, failure forensics, and custom cage modifications available within 72 hours

Inquiry View

Ball bearing

Rodamientos de bolas de ranura profunda mini de alta precisión 673-679 para aplicaciones de alta velocidad

Eliminate unplanned downtime in high-speed gearboxes, wind turbine pitch systems, and steel mill roll stands — where even micron-level vibration or thermal drift can cascade into costly production halts. This 673 bearing delivers true P4 precision with Z2V2 low-vibration grading, a critical spec for applications demanding sub-5µm runout stability under rapid acceleration. 3 × 6 × 2 mm ultra-compact radial design fits tight envelope constraints without sacrificing load rating Available sealed (2RS) or shielded (ZZ) with high-temperature synthetic grease pre-lubricated to ISO VG 2 OEM/ODM supported — including custom cage materials and ABEC-7 equivalent P4 tolerance on request Made from vacuum-melted GCr15 bearing steel, hardened to 60–62 HRC with controlled retained austenite (

Inquiry View

Ball bearing

Self-Aligning Ball Bearing 2208K-2RS for Wind Turbines & Mining Equipment

Keep wind turbines and mining equipment running longer with reduced misalignment stress and fewer unplanned shutdowns — the self-aligning ball bearing 2208K-2RS delivers proven reliability where shaft deflection and heavy radial loads are non-negotiable. 95×170×32 mm dimensions with double-row geometry and integral 2RS contact seals for lifelong grease retention in dusty, high-vibration environments Unseparated design simplifies installation on long shafts common in gearboxes and main shaft assemblies Available in P0–P2 precision grades and C0–C4 internal clearances — critical for thermal expansion management in variable-speed turbine applications OEM/ODM supported with full SKF-compatible engineering validation and ISO/TS-certified quality control

Inquiry View

Ball bearing

High-Performance Self-Aligning Ball Bearings 1203 & 1205-2RS for Wind Turbines

Extend turbine uptime and slash unplanned maintenance with our high-performance self-aligning ball bearing engineered specifically for wind power applications. These 1203 & 1205-2RS units absorb dynamic misalignment and shaft deflection common in nacelle environments—without compromising radial load capacity or service life. P6 precision grade ensures consistent rotational accuracy under variable wind loads and thermal cycling Double-row, unseparated design with 60° contact angle delivers superior moment load resistance—critical for yaw and pitch systems Brass cage option available for enhanced lubricant retention in low-speed, high-torque gearbox interfaces Compact 17×40×12 mm footprint fits tight retrofit spaces while maintaining full SKF-compliant internal geometry

Inquiry View

Ball bearing

High-Speed Deep Groove Ball Bearing 16030 for Wind Turbines & Industrial Gearboxes

Keep wind turbines and industrial gearboxes running at peak efficiency—without unplanned downtime or costly bearing replacements. The SKF 16030 bearing delivers exceptional high-speed stability and radial load capacity in demanding, continuous-operation environments where reliability isn’t optional. Engineered with precision-ground bearing steel and a zero-contact-angle deep groove design—critical for minimizing heat build-up during sustained 3,000+ rpm operation 150×225×24 mm dimensions match OEM gearbox interfaces exactly, eliminating fit-related vibration and premature failure Built to ISO 9001/TS 16949 standards and backed by our in-house SKF-certified engineering team for application validation and life-cycle support Shipped in protective packaging (24.5 × 24.5 × 4.4 cm, 3.18 kg) with traceable logistics—ready for immediate integration into your maintenance or production schedule

Inquiry View

Ball bearing

Rodamientos de bolas de ranura profunda de alta velocidad 16012–16015 para uso industrial de larga duración

Extend uptime and cut unplanned downtime in high-speed industrial applications — especially where thermal stability and consistent radial load handling are non-negotiable. These SKF 16012 bearing units are precision-engineered for long-life performance in wind power gearboxes, steel mill conveyors, and automated assembly lines where failure means costly production halts. Single-row deep groove design with 0° contact angle — optimized for pure radial loads and high-rpm smoothness Exact dimensions: 60 × 95 × 11 mm — drop-in compatible with legacy SKF 16012 mounting interfaces Through-hardened bearing steel, ISO P6 tolerance grade — critical for predictive maintenance compatibility and vibration signature consistency Packed in rigid 11.5 × 11.5 × 3.1 cm retail boxes (0.225 kg) — ready for just-in-time plant delivery or engineering lab evaluation

Inquiry View

Ball bearing

Rodamientos de Bolas de Empuje de Alto Rendimiento para Maquinaria Agrícola

Stop bearing failures mid-harvest — our thrust ball bearing delivers rock-solid axial load support in combine harvesters and balers, even under dust, vibration, and rapid directional shifts. Built to SKF engineering standards (not just branding), it’s precision-ground to P5 tolerance — meaning zero runout at 3000+ RPM, critical when your thrust race must hold position during header lift cycles. Single-row, non-aligning design with 0° contact angle — optimized for pure axial loads, not misalignment compensation Grease-lubricated out of the box (Shell Gadus S2 V220 2) — no field oiling required, reducing maintenance downtime 180 × 300 × 95 mm dimensions match OEM mounting interfaces on John Deere S600-series and CLAAS Lexion feed systems In-stock and shipped from Shanghai with ISO 9001-certified traceability — no waiting for European lead times

Inquiry View

Ball bearing

Rodamiento de bolas de ranura profunda de alta velocidad 16016 – 80×125×14mm para turbinas eólicas

Keep wind turbines spinning reliably at peak RPMs—without unplanned downtime or premature bearing failure. This SKF 16016 bearing delivers exceptional high-speed stability in demanding nacelle environments where thermal drift and cage integrity are silent killers. Single-row deep groove design with precisely controlled internal clearance (C3) for optimal high-temperature, high-RPM performance 80×125×14mm dimensions engineered to fit standard gearbox input shafts in 2–3MW turbine platforms Through-hardened bearing steel with micro-ground raceways—critical for resisting white etching crack (WEC) initiation Packed in ISO 8 cleanroom conditions and shipped with full SKF-certified traceability documentation

Inquiry View

Ball bearing

Rodamiento de bolas de empuje de alta carga 51324M para aplicaciones mecánicas

Stop bearing failures under extreme axial loads — the 51324M thrust bearing delivers rock-solid performance in high-speed mechanical drives where misalignment isn’t an option. Built for heavy industry applications like steel mill roll stands and wind turbine pitch systems, it eliminates premature wear caused by vibration-sensitive thrust interfaces. Non-aligning, separated design ensures precise axial rigidity — critical when your system can’t tolerate even 0.02° of tilt-induced edge loading Single-row construction with 0° contact angle optimized for pure thrust (not combined loads) Available in P0–P2 precision grades and Z1V1–Z3V3 vibration classes — match your OEM spec without overpaying In stock now and shipped globally from Shanghai with ISO 9001-certified traceability

Inquiry View

Ball bearing

Rodamiento de bolas de ranura profunda de acero inoxidable de alta precisión <p> para aplicaciones de bajo ruido

Eliminate operational noise and extend bearing life in precision machinery — the S6808ZZ bearing delivers consistent, ultra-quiet rotation even under sustained light-to-moderate radial loads. Engineered for applications where vibration-induced wear or acoustic interference compromises performance — think servo stages, medical imaging mounts, or lab-grade conveyors — this stainless steel deep groove ball bearing resists corrosion without sacrificing dimensional stability. 40×52×7 mm with ABEC-7 tolerance grade — critical for maintaining preload integrity in high-repeatability assemblies Double-sided metal shields (ZZ) + vacuum-degassed 440C stainless steel races — prevents micro-pitting in humid or washdown environments Pre-lubricated with low-noise synthetic grease, optimized for

Inquiry View

Ball bearing

Alta precisión S6310 Rodamiento de bolas de ranura profunda de acero inoxidable para aplicaciones automotrices de bajo ruido

Eliminate high-frequency noise and premature wear in critical automotive rotating assemblies — especially where moisture, corrosion, or tight tolerances compromise standard bearings. Our High Precision S6310 Stainless Steel Deep Groove Ball Bearing delivers consistent low-noise performance and extended service life in demanding under-hood environments. Stainless steel (AISI 440C) rings and balls — not just rust-resistant, but fully non-magnetic and passivated for ISO 9001-compliant cleanroom assembly readiness Precision ABEC-7 tolerance grade with optimized internal clearance (C2) — essential for thermal stability at sustained 12,000 rpm in EPS and transmission actuator applications Exact 30×72×19 mm metric dimensions — direct-fit replacement for OEMs requiring genuine S6310 bearing interchangeability without redesign Pre-lubricated with SKF LGMT 2 grease — formulated for -40°C to +150°C operation and compatible with common EV powertrain sealing materials

Inquiry View

Ball bearing

Rodamiento de bolas autoalineable 2211K para aplicaciones industriales de alta velocidad

Keep critical high-speed equipment running longer with minimal downtime — the self-aligning ball bearing 2211K delivers exceptional misalignment compensation and thermal stability where precision matters most. Engineered for demanding applications like wind turbine pitch systems and mining conveyors, this double-row radial bearing features a brass cage and P5 clearance option — a detail that directly improves high-RPM rotational consistency and reduces premature fatigue in asymmetric load conditions. We supply genuine SKF-compatible 2211K bearings with ISO-certified quality control, backed by on-site engineering support for custom fitment and failure analysis. Specification: 55 × 100 × 25 mm — exact OEM interchange dimensions Clearance options: C0, C3, C4 — select based on thermal expansion profile Brass or steel cage — brass preferred for high-speed, low-friction operation 10–15 day global delivery with dedicated account management

Inquiry View